Technology explainer
How Can Two Soft Actuators Give One Robot Several Ways to Move?
Combining a slow shape-setting material with a fast force-producing actuator separates body configuration from propulsion, letting one soft robot switch gaits without a rigid skeleton.
A soft robot often needs both a body shape suited to the terrain and a rapid force that produces motion. Asking one material to do both jobs can restrict speed, load and the number of possible gaits.
Configuration and actuation
A slow actuator can bend the body into a stable geometry for crawling, jumping or rolling. A faster actuator then cycles around that geometry to push against the ground. Changing the slow configuration changes how the same rapid deformation becomes movement.
Why material matching matters
If one layer is much stiffer than another, it can suppress the partner's deformation or separate at the interface. Designers therefore tune thickness, modulus, working temperature and bonding strength so both materials contribute.
The power problem
Electrical soft actuators can still require high voltage or heating. An untethered robot must carry converters, batteries, sensors and control electronics without making the body too rigid or heavy. Laboratory motion is therefore only the first step toward field operation.
First appeared in
Two Elastomers Let One All-Soft Robot Crawl, Jump, Climb and Roll