BepiColombo Enters Mercury Orbit, but Its Two Probes Remain Stacked
BepiColombo became the second mission to enter Mercury orbit after four thrusters slowed its linked European and Japanese probes into capture. MPO and Mio remain stacked, with separation due in December and science operations scheduled for April 2027.
Quick summary
- The ESA-JAXA BepiColombo spacecraft stack has entered orbit around Mercury after an eight-year journey.
- Four chemical thrusters slowed the linked orbiters into an initial elliptical orbit planned at roughly 590 by 11,640 kilometres.
- ESA's MPO and JAXA's Mio remain connected and are scheduled to separate on December 9 and 10.
- The milestone confirms orbital capture, not completed commissioning or the start of the main science programme.
BepiColombo has become only the second mission to enter orbit around Mercury. Flight controllers confirmed that the linked European and Japanese spacecraft were captured by the planet's weak gravity on November 21, ending a journey that began with launch in October 2018.
Orbit insertion completed the interplanetary journey, but BepiColombo is still a stacked spacecraft and will not begin its main science programme until April 2027.
How the spacecraft was captured
BepiColombo approached Mercury on the planet's night side. Four thrusters on ESA's Mercury Planetary Orbiter, or MPO, fired to reduce the stack's speed as it passed near the south pole. The planned result was an elliptical orbit of about 590 by 11,640 kilometres.
Controllers could not confirm success immediately. The spacecraft was about 152 million kilometres from Earth, so teams analysed radio and Doppler data for several hours before confirming orbital capture. The previous Mercury orbiter, NASA's MESSENGER, arrived in 2011 and ended its mission in 2015.
Why reaching Mercury took eight years
Mercury is close to the Sun, but that makes orbit insertion difficult rather than quick. A spacecraft leaving Earth carries substantial orbital energy and must lose speed to avoid flying past the planet. BepiColombo used one Earth flyby, two at Venus and six at Mercury to reshape its trajectory while conserving propellant.
The mission also used solar-electric propulsion during its cruise. The transfer module was discarded in September, leaving MPO's chemical propulsion system to perform the decisive capture manoeuvre and the remaining orbit changes.
Two orbiters, two scientific viewpoints
The stack contains MPO and JAXA's Mercury Magnetospheric Orbiter, called Mio, which is still protected by a sunshield. Mio is scheduled to separate on December 9 and 10, and the sunshield should be released on December 16. MPO will then continue lowering its orbit before reaching its intended science path in March.
Operating at different altitudes will let the spacecraft compare conditions near Mercury with its wider magnetic environment. The pairing is designed to study the planet's surface, interior, exosphere and magnetosphere, including how the solar wind interacts with its magnetic field.
For another mission where launch was only the first verified step, see NewTqnia's report on Japan's MMX sample-return mission to Phobos.
Reality check
The confirmed result is orbital capture of the combined spacecraft. MPO and Mio have not yet separated, reached their final science orbits or completed instrument commissioning. The initial orbit is highly elliptical, and several propulsion and deployment steps remain before the science phase scheduled for April 6, 2027.
What happens next
The next critical milestone is Mio's separation in December. MPO must then release Mio's protective sunshield, perform further burns and reach its final orbit by March 10. Commissioning is scheduled to follow, with coordinated science observations beginning in April if those steps proceed as planned.
Verified topics and entities
Sources and citations4 sources
External references used to support the reporting in this article.
Published by
NewTqnia Space Desk
An institutional editorial team within NewTqnia